Why don’t you measure 50 OHM on a 50 OHM cable? | Eric Bogatin | #HighlightsRF
When you use a multimeter, why it doesn’t show 50 OHM when you measure a 50 OHM cable or a 50 OHM PCB track? A very good explanation by Eric Bogatin
Posts
How to add PCIE to FPGA – Just to give you an idea how it is done | Adam Taylor | #HighlightsRF
About how a PCIE is implemented inside of FPGA. A highlight from my video with Adam Taylor
Looking at the data inside of a USB signal ( Example: Decoding USB keyboard protocol )
Measuring USB signal and decoding the USB protocol is easier than I thought (but you may need a decoder). Thank you very much to Gregor Hofferbert
How To Solder | #Highlights
Simple and useful tips for beginners. Steps of soldering SMD / SMT and Through hole components and recorded on a video. What are your best tips for PCB soldering? Leave them in comments – your tips may help other people.
Long vs. Short USB Cable – How much worse the signal looks if a long USB cable is used?
Measuring USB signal through different cables and for different devices. Thank you very much to Gregor Hofferbert
Where To Connect The Shield of a Cable? Explained | Rick Hartley | #Highlights
Shall we connect the shield of a cable to signal GND or Earth GND? Answered by Rick Hartley
Is the USB you designed perfect? This is how you test it … | Gregor Hofferbert
Going through a simple USB compliance test to explain how a USB interface validation and verification can be done. It’s easy.